Okay - I inadvertently ordered 16 x Equal Tees (15mm) and 16 x Elbows (15mm), but they are the solder ring variety. I wanted end fit.
I could send these back, but it could be a bit of a pain in the bum and wondered if anyone here would like first refusal? I just want to make my money back really. I can split, but would prefer to sell in one bulk lot or split the tees and elbows into two bulk orders.
Elbows are 46p each
Tees are 65p each
===NB I have changed these since I first posted, as I hadn't taken VAT into account! These prices are now correct and what I paid for them===
All still in original packaging.
Can meet in Bristol area or post. Let me know if interested.
Copper Fittings (Solder Ring)
Copper Fittings (Solder Ring)
Last edited by periolus on Sun Sep 04, 2011 11:11 pm, edited 1 time in total.
FV1: EMPTY
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA
- Mike Palmer
- Posts: 339
- Joined: Sat May 21, 2011 7:41 am
- Location: Shatton
Re: Copper Fittings (Solder Ring)
Aye, I'd take half of each if there is anyone else interested in the other bits.
Long live SHA(T)!
Re: Copper Fittings (Solder Ring)
Hello!
Well, since I posted this I have sold 8 of each to Mr. Palmer, leaving 8 x elbows (15mm) and 8 x equal tee (15mm) fittings left for sale. As posted, ordered these by mistake as didn't want the solder-ring type.
Let me know if you are interested - am selling at the original cost (they may have gone up at retailers since then!)
Would suit AG builders or budding plumbers alike!
Well, since I posted this I have sold 8 of each to Mr. Palmer, leaving 8 x elbows (15mm) and 8 x equal tee (15mm) fittings left for sale. As posted, ordered these by mistake as didn't want the solder-ring type.
Let me know if you are interested - am selling at the original cost (they may have gone up at retailers since then!)
Would suit AG builders or budding plumbers alike!
FV1: EMPTY
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA
- I_used_to_brew
- Posts: 2356
- Joined: Sat Nov 20, 2010 1:06 pm
Re: Copper Fittings (Solder Ring)
I'll have them. I've got a boiler to make as a spare/HLT, the rest can go in my man-box. Can you bring to BCB or I can wait 'till next BJCP.
- I_used_to_brew
- Posts: 2356
- Joined: Sat Nov 20, 2010 1:06 pm
Re: Copper Fittings (Solder Ring)
Do you still have them?
Re: Copper Fittings (Solder Ring)
Hi Roger!
Yes, I do. Sorry, I couldn't make it to the last meeting and have had no sodding broadband for weeks thanks to Virgin Media!
If you still want them, I can arrange to get them to you ASAP.
Barnaby
Yes, I do. Sorry, I couldn't make it to the last meeting and have had no sodding broadband for weeks thanks to Virgin Media!
If you still want them, I can arrange to get them to you ASAP.
Barnaby
FV1: EMPTY
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA
- I_used_to_brew
- Posts: 2356
- Joined: Sat Nov 20, 2010 1:06 pm
Re: Copper Fittings (Solder Ring)
Yes, I'll still have them, next meeting or BJCP or whenever will be fine (:
Re: Copper Fittings (Solder Ring)
Okay. I will be coming to BCB tomorrow - I'll bring them along.
See you then!
Barnaby
See you then!
Barnaby
FV1: EMPTY
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA
Re: Copper Fittings (Solder Ring)
Hi Roger! I have the parts in my bag and they will be along tonight. The price to cover these bits is £10.35 which covers all aspects of what I paid for them, including VAT and proportion of delivery etc. Parts = 9.80 inc, VAT plus 55p to cover the delivery part. Sound okay?
Can I put this towards the subs I owe you? I think I owe you £11, so can I just give you the remaining 65p tonight, or do you want to keep it all separate so we don't mix organisational and personal monies together?
See you later!
Barnaby
Can I put this towards the subs I owe you? I think I owe you £11, so can I just give you the remaining 65p tonight, or do you want to keep it all separate so we don't mix organisational and personal monies together?
See you later!
Barnaby
- I_used_to_brew
- Posts: 2356
- Joined: Sat Nov 20, 2010 1:06 pm
Re: Copper Fittings (Solder Ring)
You join for the membership year which is the same as the calender year, so on that basis you need to pay for May-December = £8. Everybody renews in January. That way, everybody is in sync and it makes life easy.
Nobody owes the treasurer, it's the clubs funds!
Nobody owes the treasurer, it's the clubs funds!