O Ring replacement

darrenw
Posts: 191
Joined: Tue Apr 09, 2013 10:17 pm
Location: Bristol

O Ring replacement

Post by darrenw »

Darren
----
User avatar
I_used_to_brew
Posts: 2356
Joined: Sat Nov 20, 2010 1:06 pm

Re: O Ring replacement

Post by I_used_to_brew »

Looks good.

Try and find a separate source for dip tube 'o' rings as you need to replace those quite often. I take off the posts and remove the dip tubes for cleaning after each use, I replace if they look worn, which is only after a few cleaning cycles.
beerbulger
Posts: 107
Joined: Fri Feb 08, 2013 7:15 pm

Re: O Ring replacement

Post by beerbulger »

Yeap, I've bought a set from them with no problems.

Mark
darrenw
Posts: 191
Joined: Tue Apr 09, 2013 10:17 pm
Location: Bristol

Re: O Ring replacement

Post by darrenw »

RogerP wrote:Looks good.

Try and find a separate source for dip tube 'o' rings as you need to replace those quite often. I take off the posts and remove the dip tubes for cleaning after each use, I replace if they look worn, which is only after a few cleaning cycles.
Yeah, looks like the do dip tube rings separately http://www.ebay.co.uk/itm/Cornelius-Dip ... 35efed2940 though suspect a little more pricey (50p each)
Darren
----
User avatar
I_used_to_brew
Posts: 2356
Joined: Sat Nov 20, 2010 1:06 pm

Re: O Ring replacement

Post by I_used_to_brew »

It should be possible to figure out what size they all are and order direct from the main supplier. I got lucky a few years ago with a job lot of all the smaller ones from eBay. Steve gets silicone ones which sound better.
User avatar
vacant
Posts: 183
Joined: Fri Sep 02, 2011 8:33 am
Location: downstairs

Re: O Ring replacement

Post by vacant »

https://groups.yahoo.com/neo/groups/wch ... topics/627


http://www.mcmaster.com

Dip Tube O-Rings
5/16" ID x 1/2"OD x 3/32" width
9452K172 BunaN #109
Pkg 100/$2.24

Post O-Rings
7/16" ID x 5/8" OD x 3/32" width
9452K23 BunaN #111
Pkg 100/$2.77

Lid O-Rings
3 1/2" ID x 4" OD x 1/4" width
9452K218 BunaN #417
Pkg 10/$12.50
When a man is tired of beer, he is tired of life; for there is in beer all that life can afford
User avatar
I_used_to_brew
Posts: 2356
Joined: Sat Nov 20, 2010 1:06 pm

Re: O Ring replacement

Post by I_used_to_brew »

vacant wrote:https://groups.yahoo.com/neo/groups/wch ... topics/627


http://www.mcmaster.com

Dip Tube O-Rings
5/16" ID x 1/2"OD x 3/32" width
9452K172 BunaN #109
Pkg 100/$2.24

Post O-Rings
7/16" ID x 5/8" OD x 3/32" width
9452K23 BunaN #111
Pkg 100/$2.77

Lid O-Rings
3 1/2" ID x 4" OD x 1/4" width
9452K218 BunaN #417
Pkg 10/$12.50
Interesting, but that means dealing with yanks :( at least we now have the sizes

Polymax in the UK do them, a quick check has the lid o rings at 20p each in Nitrile and 82p in Silicone (discount break points at 50/100/500). Free UK shipping, but there is a minimum order, which I think is about £15.


https://www.polymax.co.uk
darrenw
Posts: 191
Joined: Tue Apr 09, 2013 10:17 pm
Location: Bristol

Re: O Ring replacement

Post by darrenw »

OOH! Perhaps a potential bulk buy idea?
Darren
----
User avatar
I_used_to_brew
Posts: 2356
Joined: Sat Nov 20, 2010 1:06 pm

Re: O Ring replacement

Post by I_used_to_brew »

I would be interested in Silicone.
darrenw
Posts: 191
Joined: Tue Apr 09, 2013 10:17 pm
Location: Bristol

Re: O Ring replacement

Post by darrenw »

darrenw wrote:OOH! Perhaps a potential bulk buy idea?
May actually not be worth it, think £25 could buy about 50 of each.
Darren
----
Post Reply