Page 1 of 1
WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill bit
Posted: Tue Aug 14, 2012 9:19 am
by periolus
Hello!
In order to build my HLT, I need to install a sight-glass kit with a 1/4" MPT fitting. Does anyone have a drill bit / hole saw / Q-Max (preferable) that I could borrow when the time comes?
Re: WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill
Posted: Tue Aug 14, 2012 12:37 pm
by steve crawshaw
What diameter hole do you need to cut? I assume its not 1/4" as that can be done with a drill?
Re: WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill
Posted: Tue Aug 14, 2012 12:52 pm
by periolus
Er.....dunno.
I'll ask someone who knows and come back to you!
WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill bit
Posted: Tue Aug 14, 2012 3:46 pm
by periolus
Okay, the hole is either 14 or 15mm. Is there a Q-max that size? Might just need a hole-saw or cobalt drill-bit.
Re: WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill
Posted: Tue Aug 14, 2012 10:10 pm
by steve crawshaw
15.9mm (5/8") is the closest I can do. A conecutter would work but they are pricey. You can buy a qmax on line for about £5
this lot are in bris so you could pick up
http://www.pvrdirect.co.uk/
cheers
steve