WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill bit

Post your adverts here. Also includes swaps, freecycling and borrowing.
Post Reply
User avatar
periolus
Posts: 520
Joined: Mon Aug 29, 2011 8:50 pm

WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill bit

Post by periolus »

Hello!

In order to build my HLT, I need to install a sight-glass kit with a 1/4" MPT fitting. Does anyone have a drill bit / hole saw / Q-Max (preferable) that I could borrow when the time comes?

User avatar
steve crawshaw
Posts: 854
Joined: Thu Apr 22, 2010 8:49 pm
Contact:

Re: WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill

Post by steve crawshaw »

What diameter hole do you need to cut? I assume its not 1/4" as that can be done with a drill?
I like to keep a bottle of stimulant handy in case I see a snake, which I also keep handy.

User avatar
periolus
Posts: 520
Joined: Mon Aug 29, 2011 8:50 pm

Re: WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill

Post by periolus »

Er.....dunno.

I'll ask someone who knows and come back to you!

User avatar
periolus
Posts: 520
Joined: Mon Aug 29, 2011 8:50 pm

WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill bit

Post by periolus »

Okay, the hole is either 14 or 15mm. Is there a Q-max that size? Might just need a hole-saw or cobalt drill-bit.
FV1: EMPTY
FV2: EMPTY
Conditioning: NOWT
Drinking:Countdown Conundrum - Best Bitter; Haka! The Herald - Pacific IPA
Planning: San Francisco 4.9er - California Common; Event Horizon - Robust Porter; Cold Dead Hand - American IPA

User avatar
steve crawshaw
Posts: 854
Joined: Thu Apr 22, 2010 8:49 pm
Contact:

Re: WANTED (TO BORROW): 1/4" Q-Max cutter / hole saw/ drill

Post by steve crawshaw »

15.9mm (5/8") is the closest I can do. A conecutter would work but they are pricey. You can buy a qmax on line for about £5

this lot are in bris so you could pick up

http://www.pvrdirect.co.uk/



cheers
steve
I like to keep a bottle of stimulant handy in case I see a snake, which I also keep handy.

Post Reply