Page 1 of 1

Thermowell, anyone go one spare or recommend supplier

Posted: Thu Feb 18, 2016 11:02 am
by darrenw
Hi All,
Got my headless brewpi set up now, but really need a thermowell to put on my brew tank, can anyone recommend a supplier? Or has anyone got one spare they don't need? been trying to get in touch with Mr Lard but not heard anything yet? Assume he's away or slow in getting back...

Re: Thermowell, anyone go one spare or recommend supplier

Posted: Thu Feb 18, 2016 3:24 pm
by EckersKlein
Amazon.co.uk and Ebay has a variety of thermowells and similar gear.

Re: Thermowell, anyone go one spare or recommend supplier

Posted: Thu Feb 18, 2016 3:37 pm
by darrenw
EckersKlein wrote:Amazon.co.uk and Ebay has a variety of thermowells and similar gear.
Amazon seem very limited and expensive.

What I have found so far, and fair enough this is all expensive shiny steel stuff:

http://uk.rs-online.com/web/p/products/3676206/
and these
http://docs-europe.electrocomponents.co ... 19d441.pdf (they screw in)

Most of the stuff on ebay is from China and there not so specific on internal dimension and don't reply to emails.

Need to find some silicon seals for 1/2"

Re: Thermowell, anyone go one spare or recommend supplier

Posted: Fri Feb 19, 2016 6:52 pm
by steve crawshaw
I can sell you a mr. lard one if you want. 10mm outside diameter, 7.4 ID 1/2" BSP, comes with silicon o ring, nut and washer. unused, £10. can collect from knowle on saturday if you want, PM me if interested.
steve

Re: Thermowell, anyone go one spare or recommend supplier

Posted: Fri Feb 19, 2016 7:00 pm
by darrenw
steve crawshaw wrote:I can sell you a mr. lard one if you want. 10mm outside diameter, 7.4 ID 1/2" BSP, comes with silicon o ring, nut and washer. unused, £10. can collect from knowle on saturday if you want, PM me if interested.
steve
Thanks Steve, ordered one from Mark today so will wait, was planning on doing a brew this weekend but have run out of space.... So will need to hang back a couple of weeks anyway