I have now got the following:
- Cornelius keg
- co2 bottle
- co2 regulator
- beer disconnect + tap
- 20m of 3/8'' pipe
I am not sure how to connect the output of the co2 regulator to the cornelius keg.
I was thinking of buying a 1/4'' barbed gas disconnect then using the 3/8'' pipe but I can't find any way of connecting the 3/8'' pipe to the co2 regulator. I looked round B&Q and couldn't find the right connection.
This is the regulator I have:
http://www.ebay.co.uk/itm/180889649769? ... EBIDX%3AIT
I think the output is a 3/8" BSP thread. Does anyone know where I can buy a adapter for this to connect it to a 3/8'' plastic pipe?
Thanks
gas line connection
-
- Posts: 107
- Joined: Fri Feb 08, 2013 7:15 pm
Re: gas line connection
This the connector you need:
http://www.themaltmiller.co.uk/index.ph ... ductId=575
You can then go straight onto your 3/8" beer line.
Not sure of local suppliers. Mr.Lard maybe?
http://www.themaltmiller.co.uk/index.ph ... ductId=575
You can then go straight onto your 3/8" beer line.
Not sure of local suppliers. Mr.Lard maybe?
Re: gas line connection
Where are you based? I might have some bits you can have.smee204 wrote:I have now got the following:
- Cornelius keg
- co2 bottle
- co2 regulator
- beer disconnect + tap
- 20m of 3/8'' pipe
I am not sure how to connect the output of the co2 regulator to the cornelius keg.
I was thinking of buying a 1/4'' barbed gas disconnect then using the 3/8'' pipe but I can't find any way of connecting the 3/8'' pipe to the co2 regulator. I looked round B&Q and couldn't find the right connection.
This is the regulator I have:
http://www.ebay.co.uk/itm/180889649769? ... EBIDX%3AIT
I think the output is a 3/8" BSP thread. Does anyone know where I can buy a adapter for this to connect it to a 3/8'' plastic pipe?
Thanks
60 percent of the time it works every time.
-
- Posts: 5
- Joined: Thu Jun 25, 2015 3:19 pm
Re: gas line connection
I am near the MOD in north Bristol.PMowdes wrote:Where are you based? I might have some bits you can have.smee204 wrote:I have now got the following:
- Cornelius keg
- co2 bottle
- co2 regulator
- beer disconnect + tap
- 20m of 3/8'' pipe
I am not sure how to connect the output of the co2 regulator to the cornelius keg.
I was thinking of buying a 1/4'' barbed gas disconnect then using the 3/8'' pipe but I can't find any way of connecting the 3/8'' pipe to the co2 regulator. I looked round B&Q and couldn't find the right connection.
This is the regulator I have:
http://www.ebay.co.uk/itm/180889649769? ... EBIDX%3AIT
I think the output is a 3/8" BSP thread. Does anyone know where I can buy a adapter for this to connect it to a 3/8'' plastic pipe?
Thanks
Re: gas line connection
Abbey wood?smee204 wrote:I am near the MOD in north Bristol.PMowdes wrote:Where are you based? I might have some bits you can have.smee204 wrote:I have now got the following:
- Cornelius keg
- co2 bottle
- co2 regulator
- beer disconnect + tap
- 20m of 3/8'' pipe
I am not sure how to connect the output of the co2 regulator to the cornelius keg.
I was thinking of buying a 1/4'' barbed gas disconnect then using the 3/8'' pipe but I can't find any way of connecting the 3/8'' pipe to the co2 regulator. I looked round B&Q and couldn't find the right connection.
This is the regulator I have:
http://www.ebay.co.uk/itm/180889649769? ... EBIDX%3AIT
I think the output is a 3/8" BSP thread. Does anyone know where I can buy a adapter for this to connect it to a 3/8'' plastic pipe?
Thanks
I'm on keys ave, horfield. not very far away.
60 percent of the time it works every time.
Re: gas line connection
You will need something like this
http://www.ebay.co.uk/itm/3-8-BSP-RH-Nu ... 27ce109285
I use a jubilee clip to hold the hose onto the hose tail.
What connections do you have on your cornie disconnects?
http://www.ebay.co.uk/itm/3-8-BSP-RH-Nu ... 27ce109285
I use a jubilee clip to hold the hose onto the hose tail.
What connections do you have on your cornie disconnects?
60 percent of the time it works every time.
-
- Posts: 5
- Joined: Thu Jun 25, 2015 3:19 pm
Re: gas line connection
Yes not far, I'm on the new estate behind Abbey Wood. Cheswick Village.PMowdes wrote:
Abbey wood?
I'm on keys ave, horfield. not very far away.
That looks just what I was looking for. I will order one.PMowdes wrote:You will need something like this
http://www.ebay.co.uk/itm/3-8-BSP-RH-Nu ... 27ce109285
I use a jubilee clip to hold the hose onto the hose tail.
What connections do you have on your cornie disconnects?
I have ordered a cornie gas disconnect with a barbed fitting so hopefully I can just push the pipe onto this and hold using a jubilee clip.
http://www.ebay.co.uk/itm/181688434831
For now I just have a cheapo picnic tap for the beer line. Eventually I will get something a bit nicer.
Thanks for the help.
Re: gas line connection
smee204 wrote:Yes not far, I'm on the new estate behind Abbey Wood. Cheswick Village.PMowdes wrote:
Abbey wood?
I'm on keys ave, horfield. not very far away.
That looks just what I was looking for. I will order one.PMowdes wrote:You will need something like this
http://www.ebay.co.uk/itm/3-8-BSP-RH-Nu ... 27ce109285
I use a jubilee clip to hold the hose onto the hose tail.
What connections do you have on your cornie disconnects?
I have ordered a cornie gas disconnect with a barbed fitting so hopefully I can just push the pipe onto this and hold using a jubilee clip.
http://www.ebay.co.uk/itm/181688434831
For now I just have a cheapo picnic tap for the beer line. Eventually I will get something a bit nicer.
Thanks for the help.
I think you'd be better of with a john guest (push fit) type connector onto your disco's. For gas in the size of the pipe isn't really an issue. For beer out i'd suggest stepping down to 3/16" pipe, that way you only need a short length to prevent foaming. if the tap bolts directly onto the disco then i don't think you'll have any issues.
60 percent of the time it works every time.