I have a keg question;
Force carbonation? How?
Is it a case of fitting the coupler with a stop end on the beer out and gassing up or is there a bit more to it?
Crusader keg order for November
Re: Crusader keg order for November
Pretty much, cool the beer if possible 1st. Connect up at 25psi, add the gas and agitate the keg for a few minutes (rolling is easiest) to aid adsorption. If you have to disconnect to agitate then you should repeat the process a few times.
Or alternatively leave connected at 25psi for 24 hours.
Obviously you need to reduce the pressure for serving which probably means a few pints of foam, unless you have a connector with a pressure release valve.
Or alternatively leave connected at 25psi for 24 hours.
Obviously you need to reduce the pressure for serving which probably means a few pints of foam, unless you have a connector with a pressure release valve.
Regards Nic
http://forum.craftbrewing.org.uk/
http://forum.craftbrewing.org.uk/