Qmax cutters

User avatar
Jeltz69
Posts: 271
Joined: Thu Sep 05, 2013 5:21 pm
Location: Radstock
Contact:

Qmax cutters

Post by Jeltz69 »

Anybody have one I could borrow to cut a hole or 2 for elements?
User avatar
EckersKlein
Posts: 122
Joined: Thu Sep 27, 2012 11:42 pm

Re: Qmax cutters

Post by EckersKlein »

I have a holesaw set, if that is an acceptable substitute. PM me if you want to borrow it, as I probably won't remember to check the forum tonight.

-Eric
User avatar
Jeltz69
Posts: 271
Joined: Thu Sep 05, 2013 5:21 pm
Location: Radstock
Contact:

Re: Qmax cutters

Post by Jeltz69 »

Thanks for the offer, but its a stainless steel stock pot so I think it would trash a holesaw.
User avatar
rodneygullick
Posts: 289
Joined: Mon Jun 13, 2011 2:24 pm

Re: Qmax cutters

Post by rodneygullick »

there is a company in Brislington that sells them
User avatar
Jeltz69
Posts: 271
Joined: Thu Sep 05, 2013 5:21 pm
Location: Radstock
Contact:

Re: Qmax cutters

Post by Jeltz69 »

Is there, great, what are they called?
User avatar
Jeltz69
Posts: 271
Joined: Thu Sep 05, 2013 5:21 pm
Location: Radstock
Contact:

Re: Qmax cutters

Post by Jeltz69 »

found them? PVR Direct :)
SamTait
Posts: 112
Joined: Wed Oct 12, 2011 9:10 pm

Re: Qmax cutters

Post by SamTait »

Got a 20.4mm Qmax, which iirc is what you need for a 1/2bsp tank connector (which is what I use for my mash tun)
User avatar
Jeltz69
Posts: 271
Joined: Thu Sep 05, 2013 5:21 pm
Location: Radstock
Contact:

Re: Qmax cutters

Post by Jeltz69 »

If I could borrow it sometime that would be great, I'm hoping to make it to the next BBC meeting.

If I can exchange a 19kg cylinder I've been given (which is a bit rusty) I'm looking at going gas, so I won't need to do element holes but a tap will be a must.
SamTait
Posts: 112
Joined: Wed Oct 12, 2011 9:10 pm

Re: Qmax cutters

Post by SamTait »

No worries, I'll bring it along
User avatar
Jeltz69
Posts: 271
Joined: Thu Sep 05, 2013 5:21 pm
Location: Radstock
Contact:

Re: Qmax cutters

Post by Jeltz69 »

Thanks :)
Post Reply