Page 1 of 1

stc 1000 problems

Posted: Sun Jan 20, 2019 12:55 pm
by rodneygullick
i raised the temperature up to 25c since then it has gone all to cock i cant even switch it off i will have to get another one or something else what will do the job any sugestions

Re: stc 1000 problems

Posted: Sun Jan 20, 2019 3:49 pm
by steve crawshaw
Hi Rodney I would recommend the inkbird 310

It is £10 more expensive than the 308, but has the advantage of being programmable in steps. This means you could ferment at say 20C during primary and automatically set the temperature to rise to 22 for a diacetyl rest after 2 days. It has heating and cooling outputs so is suitable for using in a fermentation fridge for lagers too. It includes a delay for this purpose to protect the compressor.
cheers
steve

Re: stc 1000 problems

Posted: Sun Jan 20, 2019 10:16 pm
by rodneygullick
thanks steve i went on to the inkbird 310 site not quite sure which one to select several there ?

Re: stc 1000 problems

Posted: Mon Jan 21, 2019 6:49 pm
by RogerP
rodneygullick wrote:thanks steve i went on to the inkbird 310 site not quite sure which one to select several there ?

Steve linked directly to one he suggested.... https://www.amazon.co.uk/gp/product/B01 ... pldnSite=1

Re: stc 1000 problems

Posted: Sun Jan 27, 2019 4:10 pm
by rodneygullick
got one. all set ready to go at the moment i only want to be able to raise and lower the temperature there is one thing when it is all plugged in the lights come on is there any way to switch them off ?